Adhesive

Bel-Air PSA-200


Features

  • Assisting and Controling Vinyl Plank Shrinkage
  • Moisture Control up to:
    • 8 lbs./ASTM F1869 Calcium Chloride.
    • 90%/ASTM F2170 Relative Humidity.
  • Permanent or Releasable Bond
  • Environment Friendly Adhesive – CRI Certified!
    • Zero VOC’s!
    • Zero Solvents!
  • 4-Gallon plastic pails
  • Bond
  • Moisture Resistance
  • Roller or Trowel Applied
Category:

Description

Premium “Green” Pressure Sensitive Flooring Adhesive
Bel-Air PSA-200 is a premium grade, environment friendly resilient flooring adhesive that has been specially formulated to help minimize vinyl plank shrinkage. It is a high moisture resistant adhesive that provides maximum bond strength for a wide array of flooring types. PSA-200 is easy to spread and clean up with very low odor.

Can be used to install the following flooring types:

  • Carpet Tile
  • Cork Tile
  • Cork/Rubber/Foam Underlayments
  • Fiberglass Backed Sheet Vinyl
  • Luxury Vinyl Tile/Plank
  • Rubber Flooring
  • Vinyl Sheet Goods (Heterogeneous/Homogeneous)

Vinyl Tile & Vinyl Plank
Carpet Tile, Fiberglass Backed Sheet Vinyl
Rubber Tile, Rubber Stair Treads
(over porous substrates)

TR-8
1/16″ x 1/16″ x 1/16″
Square notch
200 sq. ft./gal. spread rate

Vinyl Tile & Vinyl Plank
Carpet Tile, Fiberglass Backed Sheet Vinyl
(over non-porous substrates)

Vinyl Sheet Goods,
Rubber Sheet Goods
(over porous substrates)

TR-13
1/16″ x 1/32″ x 1/32″
U notch
300 sq. ft./gal. spread rate

Cork Tile/Cork/Rubber /Foam Underlayment
(up to 1/4”)

TR-3
3/32″ x 3/32″ x 3/32″ V notched
120 sq. ft/gal spread rate

Cork Tile/Cork/Rubber /Foam Underlayment (greater than 1/4”)

TR-5
1/8″ x 1/8″ x 1/8″ square notched
80 sq. ft/gal spread rate

Vinyl Sheet Goods,
Rubber Sheet Goods
(over non-porous substrates)

1/16″ x 1/32″ x 5/64″
U notch
400 sq. ft./gal. spread rate

Recommended Applicator /Coverage: A smooth surface paint roller up to a 3/8″ nap is recommended. Coverage over porous substrates is up to 350 sq. ft./gal. (8.6 sq. meters/liter). Coverage over non-porous substrates is up to 400 sq. ft./gal. (9.8 sq. meters/liter). NOTE: Coverage is approximate and may vary depending on porosity of substrate and the amount of adhesive applied.